BS EN 1264‑5:2021 Системы отопления и охлаждения на водной основе, встраиваемые в поверхность Часть 5: Определение тепловой мощности для отопления стен и потолка, а также для охлаждения пола, стен и потолка

BS EN 1264‑5:2021 Water-based surface embedded heating and cooling systems — Part 5: Determination of the thermal output for wall and ceiling heating and for floor, wall and ceiling cooling

The EN 1264 series of standards provides recommendations for heating and cooling systems installed in buildings—whether residential or non-residential (e.g., office, public, commercial, or industrial)—focusing on systems designed to ensure thermal comfort.

The EN 1264 series covers water-based heating and cooling systems integrated into the surfaces of a room that requires heating or cooling. It also addresses the use of heat-transfer media other than water, where applicable.

The EN 1264 series defines standardized product characteristics through the calculation and testing of thermal output for technical specifications and certification purposes. For the design, construction, and operation of these systems—specifically types A, B, C, D, H, I, and J—refer to EN 1264-3 and EN 1264-4. For types E, F, and G, refer to the EN ISO 11855 series of standards.

The systems covered by the EN 1264 series are attached to the load-bearing structure of a building’s envelope, either mounted directly or via mounting supports. The EN 1264 series does not include ceiling systems installed within a suspended ceiling that feature a designed open air gap between the system and the building structure, which allows for air circulation driven by thermal effects. The thermal output for such systems may be determined in accordance with the EN 14037 and EN 14240 series.

EN 1264-5 specifies the recalculation of values—originally determined under EN 1264-2 for a given system—to account for different surface orientations within a room. for heating ceilings and walls, as well as for use as cooling surfaces—that is, for cooling floors, ceilings, and walls. Test results according to the EN 1264-2 standard form the basis for all calculations, regardless of whether the system in question is used for heating or cooling.

Download – BS EN 1264‑5:2021 Water-based surface embedded heating and cooling systems — Part 5: Determination of the thermal output for wall and ceiling heating and for floor, wall and ceiling cooling>>